to our customers, old company name in catalogs and other documents on april 1 st , 2010, nec electronics corporation merged with renesas technology corporation, and renesas electronics corporation took over all the business of both companies. therefore, although the old company name remains in this document, it is a valid renesas electronics document. we appreciate your understanding. renesas electronics website: http://www.renesas.com april 1 st , 2010 renesas electronics corporation issued by: renesas electronics corporation (http://www.renesas.com) send any inquiries to http://www.renesas.com/inquiry.
notice 1. all information included in this document is current as of the date this document is issued. such information, however, is subject to change without any prior notice. before purchasing or using any renesas el ectronics products li sted herein, please confirm the latest product information with a renesas electronics sales office. also , please pay regular and careful attention to additional and different information to be disclosed by rene sas electronics such as that disclosed through our website. 2. renesas electronics does not assume any liability for infringeme nt of patents, copyrights, or other intellectual property ri ghts of third parties by or arising from the use of renesas electroni cs products or techni cal information descri bed in this document . no license, express, implied or otherwise, is granted hereby under any patents, copyri ghts or other intell ectual property right s of renesas electronics or others. 3. you should not alter, modify, copy, or otherwise misappropriate any re nesas electronics product, wh ether in whole or in part . 4. descriptions of circuits, software and other related informat ion in this document are provided only to illustrate the operat ion of semiconductor products and application examples. you are fully re sponsible for the incorporation of these circuits, software, and information in the design of your equipment. renesas electronics assumes no responsibility for any losses incurred by you or third parties arising from the use of these circuits, software, or information. 5. when exporting the products or technology described in this doc ument, you should comply with the applicable export control laws and regulations and follow the proc edures required by such laws and re gulations. you should not use renesas electronics products or the technology described in this docum ent for any purpose relating to mil itary applicati ons or use by the military, including but not l imited to the development of weapons of mass de struction. renesas electronics products and technology may not be used for or incor porated into any products or systems whose manufacture, us e, or sale is prohibited under any applicable dom estic or foreign laws or regulations. 6. renesas electronics has used reasonable care in preparing th e information included in this document, but renesas electronics does not warrant that such information is error free. renesas electronics assumes no liability whatsoever for any damages incurred by you resulting from errors in or omissions from the information included herein. 7. renesas electronics products ar e classified according to the following three quality grades: ?standard?, ?high quality?, an d ?specific?. the recommended applications for each renesas electronics product de pends on the product?s quality grade, as indicated below. you must check the qua lity grade of each renesas electronics pr oduct before using it in a particular application. you may not use any renesas electronics produc t for any application categorized as ?speci fic? without the prior written consent of renesas electronics. further, you may not use any renesas electronics product for any application for which it is not intended without the prior written consent of renesas electronics. re nesas electronics shall not be in any way liable for any damages or losses incurred by you or third partie s arising from the use of any renesas electronics product for a n application categorized as ?specific? or for which the product is not intende d where you have failed to obtain the prior writte n consent of renesas electronics. the quality grade of each renesas electronics product is ?standard? unless otherwise expressly specified in a renesas electr onics data sheets or data books, etc. ?standard?: computers; office equipmen t; communications e quipment; test and measurement equipment; audio and visual equipment; home electronic a ppliances; machine tools; personal electronic equipmen t; and industrial robots. ?high quality?: transportation equi pment (automobiles, trains, ships, etc.); traffic control systems; anti-disaster systems; an ti- crime systems; safety equipment; and medical equipment not specif ically designed for life support. ?specific?: aircraft; aerospace equipment; submersible repeaters; nuclear reactor control systems; medical equipment or systems for life support (e.g. artificial life support device s or systems), surgical im plantations, or healthcare intervention (e.g. excision, etc.), and any other applicati ons or purposes that pose a di rect threat to human life. 8. you should use the renesas electronics pr oducts described in this document within the range specified by renesas electronics , especially with respect to the maximum ra ting, operating supply voltage range, movement power volta ge range, heat radiation characteristics, installation and other product characteristics. renesas electronics shall have no liability for malfunctions o r damages arising out of the use of renesas electronics products beyond such specified ranges. 9. although renesas electronics endeavors to improve the quality and reliability of its produc ts, semiconductor products have specific characteristics such as the occurrence of failure at a certain rate a nd malfunctions under certain use conditions. fur ther, renesas electronics products are not subject to radiation resistance design. please be sure to implement safety measures to guard them against the possibility of physic al injury, and injury or damage caused by fire in the event of the failure of a renesas electronics product, such as safe ty design for hardware and software in cluding but not limited to redundancy, fire control and malfunction prevention, appropri ate treatment for aging degradation or an y other appropriate measures. because the evaluation of microcomputer software alone is very difficult , please evaluate the safety of the final products or system manufactured by you. 10. please contact a renesa s electronics sales office for details as to environmental matters such as the environmental compatibility of each renesas electronics product. please use renesas electronics products in compliance with all applicable laws and regulations that regul ate the inclusion or use of c ontrolled substances, including wi thout limitation, the eu rohs directive. renesas electronics assumes no liability for damage s or losses occurring as a result of your noncompliance with applicable laws and regulations. 11. this document may not be reproduced or duplicated, in any form, in w hole or in part, without prio r written consent of renes as electronics. 12. please contact a renesa s electronics sales office if you have any questi ons regarding the informat ion contained in this document or renesas electroni cs products, or if you have any other inquiries. (note 1) ?renesas electronics? as used in this document means renesas electronics corporation and also includes its majority- owned subsidiaries. (note 2) ?renesas electronics product(s)? means any product developed or manufactured by or for renesas electronics.
package drawings (unit: mm) silicon transistor the m pa800t has built-in 2 low-voltage transistors which are designed to amplify low noise in the vhf band to the uhf band. features ? low noise nf = 1.9 db typ. @ f = 2 ghz, v ce = 1 v, i c = 3 ma ? high gain |s 21e | 2 = 6.5 db typ. @ f = 2 ghz, v ce = 1 v, i c = 3 ma ? a mini mold package adopted ? built-in 2 transistors (2 2sc4228) ordering information part number quantity packing style m pa800t loose products embossed tape 8 mm wide. pin 6 (q1 (50 pcs) base), pin 5 (q2 base), pin 4 (q2 emitter) face to perforation side of the tape. m pa800t-t1 taping products (3 kpcs/reel) remark if you require an evaluation sample, please contact an nec sales representative. (unit sample quantity is 50 pcs.) absolute maximum ratings (t a = 25 c) parameter symbol rating unit collector to base voltage v cbo 20 v collector to emitter voltage v ceo 10 v emitter to base voltage v ebo 1.5 v collector current i c 35 ma total power dissipation p t 150 in 1 element mw 200 in 2 elements note junction temperature t j 150 ?c storage temperature t stg C65 to +150 ?c note 110 mw must not be exceeded in 1 element. m pa800t high-frequency low noise amplifier npn silicon epitaxial transistor (with built-in 2 elements) mini mold pin configuration (top view) 1995 preliminary data sheet printed in japan document no. id-3634 (o.d. no. id-9141) date published april 1995 p the information in this document is subject to change without notice. 2.1?.1
1.25?.1
1 2 3 6 5 4 0.2 ? +0.1 0.65 0.65 1.3 2.0?.2 0.9?.1 0.7 0~0.1 0.15 ? +0.1 654 q 1 q 2 123 pin connections
1. collector (q1)
2. emitter (q1)
3. collector (q2)
4. emitter (q2)
5. base (q2)
6. base (q1)
xy
m pa800t 2 electrical characteristics (t a = 25 c) parameter symbol condition min. typ. max. unit collector cutoff current i cbo v cb = 10 v, i e = 0 1.0 m a emitter cutoff current i ebo v eb = 1 v, i c = 0 1.0 m a dc current gain h fe v ce = 3 v, i c = 5 ma note 1 80 200 gain bandwidth product f t v ce = 3 v, i c = 5 ma 5.5 80 ghz feed-back capacitance c re v cb = 3 v, i e = 0, f = 1 mhz note 2 0.7 pf insertion power gain (1) |s 21e | 2 v ce = 1 v, i c = 3 ma, f = 2 ghz 4.5 6.5 db insertion power gain (2) |s 21e | 2 v ce = 3 v, i c = 5 ma, f = 2 ghz 5.5 7.5 db noise figure (1) nf v ce = 1 v, i c = 3 ma, f = 2 ghz 1.9 3.2 db noise figure (2) nf v ce = 3 v, i c = 5 ma, f = 2 ghz 1.9 3.2 db notes 1. pulse measurement: pw 350 m s, duty cycle 2 % 2. measured with 3-pin bridge, emitter and case should be connected to guard pin of bridge. h fe classification rank kb marking rl h fe value 80 to 200 typical characteristics (t a = 25 c) 100 0 5 0 10 0.5 50 100 150 200 5 1.0 10 15 20 0 0.5 1.0 10 20 1 5 10 50 20 50 100 200 v ce = 3 v v ce = 3 v 120 a 100 a 80 a i b = 20 a total power dissipation p t (mw) ambient temperature t a (?c) collector to emitter voltage v ce (v) collector current i c (ma) collector current i c (ma) base to emitter voltage v be (v) collector current i c (ma) dc current gain h fe 60 a 40 a 25 free air i c - v be characteristics h fe - i c characteristics p t - t a characteristics i c - v ce characteristics 2 elements in total per element 160 a m 140 a m m m m m m m
m pa800t 3 0 0.5 0 0.5 1 5 10 50 4 8 12 0.1 1.0 0.5 5.0 0 5 10 15 20 25 1 5 10 50 1 2 3 4 5 v ce = 3 v
i c = 5 ma v ce = 3 v
f = 2 ghz v ce = 3 v
f = 2 ghz 2.0 0.1 1 0 0.5 2 5 10 20 50 0.2 0.5 1.0 2.0 5.0 1 5 10 50 2 4 6 8 10 f = 1 mhz v ce = 3 v
f = 2 ghz c re - v cb characteristics collector to base voltage v cb (v) feed-back capacitance c re (pf) f t - i c characteristics collector current i c (ma) gain bandwidth product f t (ghz) l s 21e l 2 - i c characteristics collector current i c (ma) insertion power gain | s 21e | 2 (db) frequency f (ghz) insertion power gain | s 21e | 2 (db) | s 21e | 2 - f characteristics nf - i c characteristics collector current i c (ma) noise figure (db)
m pa800t 4 s-parameters v ce = 3 v, i c = 5 ma, z o = 50 w frequency s11 s21 s12 s22 mhz mag ang mag ang mag ang mag ang 100.00 .875 e18.6 14.087 161.1 .018 78.2 .958 e10.1 200.00 .762 e35.0 12.290 145.1 .034 68.6 .888 e17.7 300.00 .677 e47.2 10.888 133.6 .048 66.6 .800 e24.4 400.00 .565 e59.4 9.275 123.6 .055 65.8 .719 e26.7 500.00 .495 e67.5 8.300 115.7 .063 63.5 .669 e28.7 600.00 .425 e76.1 7.184 108.9 .074 61.1 .610 e30.3 700.00 .372 e81.6 6.454 104.8 .084 63.8 .600 e30.6 800.00 .327 e88.5 5.818 99.5 .089 62.7 .560 e31.3 900.00 .289 e93.6 5.231 95.5 .092 64.6 .543 e30.1 1000.00 .255 e100.5 4.820 92.0 .104 62.8 .519 e33.4 1100.00 .236 e105.2 4.444 88.8 .105 64.2 .512 e31.8 1200.00 .214 e112.2 4.142 85.3 .113 64.2 .497 e33.4 1300.00 .195 e117.6 3.842 83.2 .122 63.6 .476 e33.2 1400.00 .182 e123.8 3.554 79.3 .127 65.0 .481 e34.2 1500.00 .165 e129.9 3.343 77.4 .139 64.1 .467 e34.6 1600.00 .153 e137.4 3.218 75.3 .140 64.5 .466 e34.8 1700.00 .145 e144.3 3.091 73.6 .152 65.4 .458 e37.2 1800.00 .139 e151.8 2.857 70.4 .162 64.3 .456 e36.1 1900.00 .134 e157.0 2.764 68.7 .168 62.3 .451 e38.4 2000.00 .129 e164.7 2.624 66.4 .176 64.8 .445 e39.0 v ce = 3 v, i c = 3 ma, z o = 50 w frequency s11 s21 s12 s22 mhz mag ang mag ang mag ang mag ang 100.00 .943 e13.4 9.384 165.9 .020 84.1 .969 e7.7 200.00 .868 e26.6 8.668 152.8 .038 77.2 .936 e13.8 300.00 .815 e37.7 8.165 142.9 .051 67.9 .876 e20.9 400.00 .717 e48.9 7.279 132.9 .062 63.9 .804 e23.5 500.00 .655 e56.8 6.780 125.5 .075 63.9 .764 e26.7 600.00 .577 e65.5 6.061 118.0 .084 60.0 .708 e29.7 700.00 .518 e71.2 5.504 112.8 .091 59.7 .685 e31.1 800.00 .468 e78.1 5.074 106.7 .098 57.0 .639 e32.0 900.00 .420 e83.7 4.632 102.8 .102 59.0 .611 e32.8 1000.00 .380 e90.6 4.340 98.3 .105 56.6 .592 e35.0 1100.00 .344 e94.8 3.951 94.8 .112 57.8 .579 e34.1 1200.00 .321 e101.6 3.717 90.5 .121 59.0 .551 e35.0 1300.00 .291 e105.9 3.485 87.6 .128 58.7 .532 e35.9 1400.00 .273 e111.7 3.306 84.3 .135 59.8 .535 e36.6 1500.00 .250 e117.2 3.134 80.7 .140 58.0 .511 e37.5 1600.00 .228 e122.4 2.959 79.0 .145 59.5 .516 e37.7 1700.00 .219 e128.5 2.819 76.0 .153 59.0 .504 e39.0 1800.00 .199 e135.3 2.699 73.9 .161 58.4 .493 e39.9 1900.00 .193 e139.6 2.572 71.9 .163 60.3 .489 e41.4 2000.00 .182 e146.9 2.474 68.3 .175 59.8 .482 e41.4 v ce = 3 v, i c = 1 ma, z o = 50 w frequency s11 s21 s12 s22 mhz mag ang mag ang mag ang mag ang 100.00 1.023 e7.6 3.505 172.1 .025 86.4 .995 e4.6 200.00 .983 e16.1 3.400 163.3 .039 79.3 .986 e7.8 300.00 .975 e22.4 3.368 157.3 .061 74.6 .976 e12.8 400.00 .922 e31.8 3.219 149.1 .075 70.7 .936 e15.1 500.00 .899 e36.9 3.186 143.3 .093 66.4 .922 e18.8 600.00 .849 e44.7 3.046 135.7 .105 62.2 .885 e22.5 700.00 .812 e50.6 2.905 131.1 .113 61.7 .880 e24.4 800.00 .774 e57.1 2.830 124.4 .128 55.7 .846 e27.2 900.00 .727 e62.9 2.694 119.2 .134 55.6 .808 e28.8 1000.00 .680 e69.3 2.597 114.1 .146 53.7 .790 e31.8 1100.00 .651 e74.1 2.479 109.3 .146 50.3 .766 e32.8 1200.00 .616 e79.8 2.392 104.8 .155 49.8 .741 e34.9 1300.00 .575 e85.2 2.302 101.1 .155 46.2 .714 e35.9 1400.00 .546 e90.6 2.207 96.0 .160 46.7 .708 e36.8 1500.00 .512 e95.8 2.110 92.1 .168 43.6 .685 e38.4 1600.00 .481 e100.6 2.034 88.8 .165 45.5 .676 e40.1 1700.00 .463 e106.3 1.989 85.5 .176 45.3 .667 e41.8 1800.00 .440 e111.8 1.903 82.2 .173 43.8 .649 e42.3 1900.00 .419 e116.4 1.854 78.9 .174 43.5 .633 e44.2 2000.00 .394 e121.2 1.779 75.5 .173 43.7 .630 e45.2
m pa800t 5 [memo]
m pa800t 6 no part of this document may be copied or reproduced in any form or by any means without the prior written consent of nec corporation. nec corporation assumes no responsibility for any errors which may appear in this document. nec corporation does not assume any liability for infringement of patents, copyrights or other intellectual property rights of third parties by or arising from use of a device described herein or any other liability arising from use of such device. no license, either express, implied or otherwise, is granted under any patents, copyrights or other intellectual property rights of nec corporation or others. while nec corporation has been making continuous effort to enhance the reliability of its semiconductor devices, the possibility of defects cannot be eliminated entirely. to minimize risks of damage or injury to persons or property arising from a defect in an nec semiconductor device, customer must incorporate sufficient safety measures in its design, such as redundancy, fire-containment, and anti-failure features. nec devices are classified into the following three quality grades: standard, special, and specific. the specific quality grade applies only to devices developed based on a customer designated quality assurance program for a specific application. the recommended applications of a device depend on its quality grade, as indicated below. customers must check the quality grade of each device before using it in a particular application. standard: computers, office equipment, communications equipment, test and measurement equipment, audio and visual equipment, home electronic appliances, machine tools, personal electronic equipment and industrial robots special: transportation equipment (automobiles, trains, ships, etc.), traffic control systems, anti-disaster systems, anti-crime systems, safety equipment and medical equipment (not specifically designed for life support) specific: aircrafts, aerospace equipment, submersible repeaters, nuclear reactor control systems, life support systems or medical equipment for life support, etc. the quality grade of nec devices in standard unless otherwise specified in nec's data sheets or data books. if customers intend to use nec devices for applications other than those specified for standard quality grade, they should contact nec sales representative in advance. anti-radioactive design is not implemented in this product. m4 94.11
|
